APEGS Registration Orientation - RESCHEDULED from November 20
2024-12-11 19:00 - 21:30 (America/Regina)
Join APEGS for a free information session on APEGS registration processes and requirements, including a question and answer session. This event is tailored towards internationally educated member-in-training applicants, all members-in-training, and supervisors of members-in-training. Pre-registration is not required.
December 11, 2024 – Regina
Delta Hotels Regina – Tuscany Room
1919 Saskatchewan Drive, Regina, SK S4P 4H2
7:00 pm to 7:30 pm – Member-in-training Application and Academic Assessment Process
7:30 pm to 7:45 pm – Refreshment break
7:45 pm to 8:45 pm – Competency Assessment of Work Experience
8:45 pm to 9:30 pm – Question and Answer

Case Studies of Pile Quality Assessment using Pile Integrity Testing and Foundation Optimization using Dynamic Load Testing
2024-12-12 12:00 - 13:00
Date: December 12, 2024
Time: 12:00 PM – 1:00 PM
Event Format: In-person Presentation
Hosting Organization: Saskatoon Geotechnical Group
Event Summary: Presented by Nicole Thiemann, P.Eng., Geotechnical Engineer with Machibroda Engineering Ltd.
How to Register: Click here for more information and to register
Event Contact: Saskatoon Geotechnical Group – www.saskatoongeotech.com
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

Speaking of Diversity in Engineering
2024-12-12 19:00 - 20:00
Date: December 12, 2024
Time: 7:00 PM – 8:00 PM
Event Format: Lecture
Location: Online
Hosting Organization: Saskatoon Engineering Society
Event Summary: Historically, engineering and control systems have had a rather homogeneous set of participation, which is caused by a variety of factors ranging from bias to long held social norms and company and government policies which do not to support broader participation in the workforce. Additionally, when achievements are experienced by more diverse members, they are often overlooked or diminished which contribute to high dropout rates. By failing to improve inclusion, the damages and lost opportunities lie not just with those who are not included, but with the industry as a whole. A more diverse cast offers a wider array of experiences and knowledge known to lead to better solutions. To improve this, broad changes are necessary from how we view and support less traditional candidates to how employers and governments support workers and families.
How to Register: Click here for more information and to register
Event Contact: Saskatoon Engineering Society – info@saskatoonengineers.com
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

SES Workshop - Job Search and Resume
2024-12-15 10:00 - 14:00
Date: December 15, 2024
Time: 10:00 AM – 2:00 PM
Event Format: Workshop
Location: Saskatoon, SK
Hosting Organizations: Saskatoon Engineering Society
Event Summary: This Job Search Seminar will provide practical tools and strategies to navigate the local job market. Participants will learn to craft effective resumes and cover letters, understand the benefits of networking, and gain strategies for job interviews.
How to Register: Click here for more information and to register
Event Contact: Saskatoon Engineering Society – info@saskatoonengineers.com
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

Introduction to Additive Manufacturing and Unlocking its Potential in Saskatchewan's Key Industries – An APEGS Webinar - SOLD OUT
2024-12-17 12:00 - 13:00
Date: December 17, 2024
Time: 12:00 PM – 1:00 PM CST (Saskatchewan Time)
Event Format: Live Webinar – Microsoft Teams
Hosting Organization: APEGS – A Member-Led Live Webinar Series Presentation
Event Summary: This webinar will provide a comprehensive introduction to the seven categories of additive manufacturing (AM), highlighting their materials, processes, and mechanisms. We will explore Material Extrusion, Vat Polymerization, Powder Bed Fusion, Material Jetting, Binder Jetting, Sheet Lamination, and Directed Energy Deposition, offering a clear understanding of how each method works and the types of materials they employ. Following the technical introduction, the focus will shift to Saskatchewan’s key industries – agriculture, mining, small modular reactors (SMRs), and carbon capture and storage (CCS). We will examine the current and potential applications of AM in these sectors, showcasing recent use cases that highlight its ability to enhance productivity, create custom solutions, and promote sustainability. The session will also explore future possibilities for AM in addressing industry-specific challenges, such as machinery customization, component innovation, and environmental impact reduction. Attendees will gain insight into how AM can drive technological advancements and economic growth in Saskatchewan.
Presenter: Dr. Mohammad Khondoker, Ph.D., P.Eng. is an Assistant Professor in the Industrial Systems Engineering program at the University of Regina (U of R). He earned his Ph.D. in Mechanical Engineering from the University of Alberta. Prior to joining the U of R, he gained valuable teaching and research experience at Southern University in Baton Rouge, Louisiana, and McMaster University. Dr. Khondoker currently leads the Additive Manufacturing Research Lab (AMRL), where his research focuses on additive manufacturing, 3D printing, polymer processing, and smart materials. His work explores innovative solutions in these areas, advancing both academic research and industrial applications.
Who Should Attend: Professionals in agriculture, mining, small modular reactors (SMRs), and carbon capture and storage (CCS) can familiarize themselves with additive manufacturing, and understand how this innovative technology can enhance and transform their industries.
General Information: There is no cost to attend, but registration is required. This webinar is eligible for 1 Formal Activity CPD credit.
This event will be held live on the Microsoft Teams platform. The meeting link will be sent by end of day on December 13, 2024, to the email address in which you registered for this event.
This webinar is now full. If you need to cancel your registration to this event, please email cpd@apegs.ca. If you would like to be added to a waitlist, please email cpd@apegs.ca
NOTE: Clicking the ‘Add to Calendar’ button on this page does NOT register you for this event. This webinar will not be recorded.
Event Contact: APEGS Professional Development Department – Angela Foster or Jolene Arthur – cpd@apegs.ca
Disclaimer: The views expressed during this event are those of the presenters and do not necessarily represent the views of APEGS.

Salaries & Fees in a Changing Economy – An APEGS Webinar
2025-01-14 12:00 - 13:00
Date: January 14, 2025
Time: 12:00 PM – 1:00 PM CST (Saskatchewan Time)
Event Format: Live Webinar – Microsoft Teams
Hosting Organization: APEGS – A Member-Led Live Webinar Series Presentation
Event Summary: This presentation provides a basic overview and generic understanding of the relationship between an individual’s personal salary/compensation and the corporate billing rates or fees associated with that individual in the Saskatchewan marketplace.
Presenter: Bert Munro, P.Eng., FCSCE, FCSSE, FEC, FGC (Hon) retired as a Vice President and General Manager of Associated Engineering and ATAP Infrastructure Management, where he was responsible for the business and engineering operations. Over 45 years of experience in municipal infrastructure, building, and water resource engineering, project, asset, and business management has led to a keen interest in the roles of the engineer, contractor, owner, and the public, in infrastructure planning & development, life cycle & risk management, public & environmental protection. He continues to provide specialized advisory services and to serve on the Boards of the Saskatoon Airport Authority and the Columbarium at St John’s Cathedral. A Past President of the Association of Professional Engineers and Geoscientists of Saskatchewan, the Western Canada Water and Wastewater Association, and the Consulting Engineers of Saskatchewan, Bert has also served as a Volunteer with the Canadian Society for Civil Engineering; the University of Saskatchewan; SIAST; the Canadian Cancer Society and he continues to serve as an active volunteer with several organizations.
Who Should Attend: This presentation is most appropriate for those early in their career or new to the marketplace. It is of value to those in Consulting, Industrial, Government sectors.
General Information: There is no cost to attend, but registration is required. This webinar is eligible for 1 Formal Activity CPD credit. This event will be held live on the Microsoft Teams platform.
Important: Once your registration is complete, you will receive a unique link to join the meeting. This link should not be shared as it is unique to each registration and allows APEGS to verify your attendance.
Registration is now closed. If you need to cancel your registration to this event, please email cpd@apegs.ca.
NOTE: Clicking the ‘Add to Calendar’ button on this page does NOT register you for this event. This webinar will not be recorded.
Event Contact: APEGS Professional Development Department – Angela Foster or Jolene Arthur – cpd@apegs.ca
Disclaimer: The views expressed during this event are those of the presenters and do not necessarily represent the views of APEGS.

Five Principles for Construction Standards – an APEGS Webinar
2025-01-15 12:00 - 13:00
Date: January 15, 2025
Time: 12:00 PM – 1:00 PM CST (Saskatchewan Time)
Event Format: Live Webinar – Microsoft Teams
Hosting Organization: APEGS – A Live Webinar Series Presentation
Event Summary: This webinar will focus on the five principles for construction standards found in provincial legislation. The documents that will be referenced will be the Construction Codes Act, Building Code Regulations, Energy Code Regulations, National Building Code of Canada (NBC) and the National Energy Code of Canada for Buildings (NECB). Through this overview we will highlight how the provincial legislation directly references the Engineering and Geoscience Professions Act, including the prescribed roles and responsibilities related to construction standards.
Presenter: Peter Wotherspoon is the Chief Codes Administrator for the Province of Saskatchewan in the Building and Technical Standards Branch in the Ministry of Government Relations. Mr. Wotherspoon has 20 plus years of experience for construction including design and implementation in provincial and municipal levels of government in addition to private industry. During his career he has published or co-published various guides and advisories to develop knowledge to all stakeholders throughout Saskatchewan and currently sits on a variety of construction standards related national and technical committees. Mr. Wotherspoon possesses a Professional Technologist (P. Tech.) registration and is a Class 2 Licensed Building Official.
Who Should Attend: This webinar will appeal to all engineers that have direct design or design review of construction standards throughout Saskatchewan.
General Information: There is no cost to attend, but registration is required. This webinar is eligible for 1 Formal Activity CPD credit. This event will be held live on the Microsoft Teams platform. This webinar will not be recorded.
Important: Once your registration is complete, you will receive a unique link to join the meeting. This link should not be shared as it is unique to each registration and allows APEGS to verify your attendance.
Registration is now closed. If you need to cancel your registration to this event, please email cpd@apegs.ca.
NOTE: Clicking the ‘Add to Calendar’ button on this page does NOT register you for this event.
Event Contact: APEGS Professional Development Department – Angela Foster or Jolene Arthur – cpd@apegs.ca
Disclaimer: The views expressed during this event are those of the presenters and do not necessarily represent the views of APEGS.

Salaries & Fees in a Changing Economy– An APEGS Webinar - CLOSED
2025-01-29 12:00 - 13:00
Date: January 29, 2025 (re-scheduled from January 14)
Time: 12:00 PM – 1:00 PM CST (Saskatchewan Time)
Event Format: Live Webinar – Microsoft Teams
Hosting Organization: APEGS – A Member-Led Live Webinar Series Presentation
Event Summary: This presentation provides a basic overview and generic understanding of the relationship between an individual’s personal salary/compensation and the corporate billing rates or fees associated with that individual in the Saskatchewan marketplace.
Presenter: Bert Munro, P.Eng., FCSCE, FCSSE, FEC, FGC (Hon) retired as a Vice President and General Manager of Associated Engineering and ATAP Infrastructure Management, where he was responsible for the business and engineering operations. Over 45 years of experience in municipal infrastructure, building, and water resource engineering, project, asset, and business management has led to a keen interest in the roles of the engineer, contractor, owner, and the public, in infrastructure planning & development, life cycle & risk management, public & environmental protection. He continues to provide specialized advisory services and to serve on the Boards of the Saskatoon Airport Authority and the Columbarium at St John’s Cathedral. A Past President of the Association of Professional Engineers and Geoscientists of Saskatchewan, the Western Canada Water and Wastewater Association, and the Consulting Engineers of Saskatchewan, Bert has also served as a Volunteer with the Canadian Society for Civil Engineering; the University of Saskatchewan; SIAST; the Canadian Cancer Society and he continues to serve as an active volunteer with several organizations.
Who Should Attend: This presentation is most appropriate for those early in their career or new to the marketplace. It is of value to those in Consulting, Industrial, Government sectors.
General Information: There is no cost to attend, but registration is required. This webinar is eligible for 1 Formal Activity CPD credit. This event will be held live on the Microsoft Teams Webinar platform.
Important: Once your registration is complete, you will receive a Teams Meeting invitation which includes a unique link to join the meeting. This link should not be shared as it is unique to each registration and allows APEGS to verify your attendance.
If you do not receive the Teams Meeting invitation, please check your junk/spam folders and ensure your email security settings allow you to receive all emails from APEGS.
Registration is now closed. If you need to cancel your registration to this event, please email cpd@apegs.ca.
NOTE: Clicking the ‘Add to Calendar’ button on this page does NOT register you for this event.
This webinar will not be recorded
Event Contact: APEGS Professional Development Department – Angela Foster or Jolene Arthur – cpd@apegs.ca
Disclaimer: The views expressed during this event are those of the presenters and do not necessarily represent the views of APEGS.

Life Starting as a Future Leader
2025-01-29 12:00 - 13:30
Date: January 29, 2025
Time: 12:00 – 1:30 PM
Event Format: Online Presentation
Location: Online
Hosting Organization: Construction Associations of Saskatchewan & Association of Consulting Engineering Companies – Saskatchewan (ACEC-SK)
Event Summary: Transitioning into the industry as a new engineer or construction professional, and addressing early-career challenges while navigating personal ambitions.
Topics to Cover:

The experience of entering male-dominated fields and building confidence as a young professional.
Challenges experienced on construction sites.
Overcoming impostor syndrome and finding mentorship opportunities.
Balancing the pressures of professional growth with personal goals (e.g., relationships, financial independence).
Discussing societal pressures and expectations, such as the decision to start a family.
Creating a support network within the organization and externally

How to Register: Click here for more information and to register
Event Contact: Association of Consulting Engineering Companies – Saskatchewan. Email: info@acec-sk.ca
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

How Engineers Can Save Lives with Additive Manufacturing
2025-01-30 19:00 - 20:00
Date: January 30, 2025
Time: 7 PM – 8PM CST
Event Format: Virtual Lecture
Location: Online
Hosting Organization: Saskatoon Engineering Society
Event Summary: In tissue engineering, tissue scaffolds can be fabricated by various means—among them three dimensional (3D) printing has emerged as a promising method of fabrication. During the printing process, materials are forced to flow out of the printing head to form a 3D structure on the printing stage. The properties and printability of these materials are important to the formation and maintenance of the architecture and structural integrity of the scaffolds. Among the various materials used to print tissue scaffolds, sodium alginate (Alg) and carboxymethyl chitosan (CMCt) stand out due to their biocompatibility, biodegradability, and their ability to retain a large amount of water for mimicking the native extracellular matrix. This presentation will introduce background concepts important to tissue scaffolds like the integration of 3D printing with polymeric materials and tissue scaffolds design. Then, data on characterization and optimization methods for printing will be shown, and finally future strategies to address some gaps in the current research will be discussed.
How to Register: Click here for more information and to register
Event Contact: Saskatoon Engineering Society: www.saskatoonengineers.com
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

The CHBA Net Zero Home Labelling Program
2025-02-05 07:00
Date: February 5, 2025
Time: 7:00 AM
Event Format: Hybrid event
Location: Saskatoon, SK
Hosting Organization: Saskatchewan Energy Management Task Force (EMTF)
Event Summary: Information about the initiative and how it encourages healthier and more sustainable housing will be shared. Speaker: René Kreutzwieser- is a graduate from the University of Saskatchewan’s environmental engineering program. He is the Net Zero Project Manager with NRG Inspections and Consulting and has been an energy advisor since 2021.
How to Register: Click here for more information and to register.
Event Contact: Saskatchewan Energy Management Task Force – www.emtfsask.ca/saskatoon
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

BHP Potash: Geology, Exploration and Subsurface Inputs for Jansen Mine
2025-02-21 12:00 - 13:00
Date: February 21, 2025
Time: 12:00 PM – 1:00 PM
Event Format: In-Person Presentation
Location: Saskatoon, SK
Hosting Organization: Saskatoon Geoscience Discussion Group
Event Summary: Presentation by Shaun Loverin (Superintendent Potash Exploration) regarding the Jansen Potash Mine.
How to Register: Click here for more information and to register. Deadline to register is February 17, 2025.
Event Contact: Saskatoon Geoscience Discussion Group – https://stoongeogroup.ca/
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

Get to the Point: A Practical Writing Course for Technical Professionals
2025-02-25
Date: February 25, 2025
Event Format: Online Course
Location: Online
Hosting Organization: RGI International
Event Summary: This interactive training introduces participants to the Pyramid Method of Writing(tm) and applies it to writing effective emails, letters, short and long reports, and proposals. Participants will receive personal feedback on three writing assignments. The format provides time to discuss and evaluate longer more technical documents such as recommendations, investigations, formal reports and studies, and proposals. Individual and group exercises allow participants to practice the concepts and learn from each other.
AGENDA:
Webinar 1 (1.5 hours)

Identifying and focusing the reader’s attention on the main message
Differentiating between “need to know” and “nice to know” information
Applying Pyramid Method of WritingTM to organize information
Understanding the purpose for writing (informative or persuasive)

Webinar 2 (1.5 hours)

Writing action-getting requests for internal and external audiences
Using language to create a confident image of you and your organization
Using the active voice to make the information easier to understand

Webinar 3 (1.5 hours)

Personalizing your writing to create a comfortable tone
Eliminating wordy expressions from your writing
Developing a clear, concise and complete writing style
Evaluating a request from a reader’s point of view

Webinar 4 (1.5 hours)

Determining the best tool: email, phone, text or video
Writing to multiple-audiences (technical and non-technical)
Writing short reports – incident, inspection, field trip, progress and project completion

Webinar 5 (1.5 hours)

Writing longer reports- evaluations, recommendations
Writing numbers and abbreviations
Writing instructions and procedures

Webinar 6 (1.5 hours)

Editing techniques
Writing short informal proposals
Designing information for readability

This course is accredited by the Engineering Institute of Canada (EIC) and is eligible for 12 PDHs or 1.2 CEUs.Evaluating a request from a reader’s point of view
How to Register: Click here for more information and to register
Event Contact: RGI International – https://rgilearning.com/
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

Implementing UAVs in Geotechnical Practice
2025-02-26 12:00 - 13:00
Date: February 26, 2025
Time: 12:00 PM – 1:00 PM
Event Format: In-Person Presentation
Location: Saskatoon, SK
Hosting Organization: Saskatoon Geotechnical Group
Event Summary: Dr. Jorge Rodriguez, Ph.D., M.Sc., P.Eng. will be presenting on the use of unmanned aerial vehicle photogrammetry in geotechnical practice.
How to Register: Click here for more information and to register
Event Contact: Saskatoon Geotechnical Group – www.saskatoongeotech.com
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

The Iron Ring at 100: A New Era for the Calling of an Engineer
2025-03-03 11:00
Date: March 3, 2025
Time: 11:00 AM CST
Event Format: Virtual Event
Location: Online
Hosting Organization: Engineers Canada
Event Summary: Kick off National Engineering Month 2025 with a celebration of the centennial of the Iron Ring and the unveiling of the newly modernized Calling of an Engineer. This 90-minute virtual event will honor the legacy of this cherished tradition while exploring how recent updates to the Obligation Ceremony reflect a more inclusive and forward-thinking engineering profession. Featuring a dynamic panel of engineers and thought leaders, with questions submitted by engineering students and early career engineers, we’ll discuss the history, significance, and future of the Calling of an Engineer (also known as the Obligation Ceremony) and its role in shaping ethical engineers. Be part of this exciting moment in engineering history!  The speakers and panelists will be speaking in English during this event. There will be simultaneous interpretation available in French.
How to Register: Click here for more information and to register
Event Contact: Engineers Canada – www.engineerscanada.ca
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

58th INTERNATIONAL CONFERENCE ON WATER MANAGEMENT MODELING
2025-03-05 - 2025-03-07
Date: March 5-7, 2025
Event Format: Conference
Location: Toronto, ON
Hosting Organization: International Conference on Water Management Modeling (ICWMM)
Event Summary: The ICWMM brings together professionals from around the world to exchange ideas on current practices and emerging technologies in water management. Emphasis is on state-of-the-art computer modeling for resolving water quantity and quality problems in stormwater, wastewater, watershed, and water distribution systems. Presentations are of a very high standard and the atmosphere is informal and relaxed. And, by accepting abstracts up until the last minute, a spontaneity is achieved which gives the conference its special character. Inherently multi-disciplinary, the ICWMM is designed for any who have a direct stake in stormwater management, non-point source pollution or urban water systems.
How to Register: Click here for more information and to register.
Event Contact: International Conference on Water Management Modeling (ICWMM) – info@icwmm.org
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

2025 Awards Banquet
2025-03-06 17:30 - 22:00 | Delta Downtown Saskatoon, 405 20th St E, Saskatoon, Saskatchewan, S7K 6X6, Canada
Location: Delta Downtown, 405 20th St E, Saskatoon, SK
Cost: $50/person
Opening Reception: 5:30 PM | Fellowships: 6:45 PM | Dinner: 7:00 PM | Awards: 8:00 PM | Announcements & Closing Reception: 9:00 PM
The APEGS Awards recognize Saskatchewan engineers and geoscientists for their contributions to the professions and the public interest, showcasing exemplary competence and conduct. The awards foster professional excellence among members, inspire the next generation of professionals, and raise awareness of the role of engineers, geoscientists, and APEGS in serving the public interest. Learn more at https://www.apegs.ca/members/honours-awards.
The awards will be presented at the banquet as part of Engineering and Geoscience Week, which is observed March 2 to 8, 2025.
Registration is now closed.

Award recipients for 2025 are:
Brian Eckel Distinguished Service – Leon Botham, P.Eng., FEC, FGC (Hon.)
An honour given only to those who truly exemplify the best standards of engineering and geoscience in Saskatchewan.

McCannel Award – Jerome (Jerry) Helfrich, P.Eng., FEC
Honours service to APEGS, and to the professions as a whole.
Exceptional Engineering/Geoscience Project Award – Nortek Data Center Cooling for StatePoint Liquid Cooling Technology
Recognizes accomplishments in engineering and/or geoscience.
Environmental Excellence Award – Water Security Agency and KGS Group for the Davis Diversion Coanda Fish Exclusion Screen
Recognizes the exceptional achievements by an individual or team related to environmental protection and preservation.
Promising Member Award – Jason Brent Whitelaw, P.Eng.
Recognize exceptional achievements by a professional member in the early stages of his/her career in Saskatchewan.

Career Progression and Work-Life Balance
2025-03-11 12:00 - 13:30
Date: March 11, 2025
Time: 12:00 – 1:30 PM
Event Format: Online Presentation
Location: Online
Hosting Organization: Construction Associations of Saskatchewan & Association of Consulting Engineering Companies – Saskatchewan (ACEC-SK)
Event Summary: Balancing the demands of career growth with the complexity of managing a family and a full schedule.
Topics to Cover:

Strategies for setting boundaries and managing expectations in both professional and personal spheres.
Discussing career growth opportunities (promotions, leadership roles) while balancing family needs.
Handling common conflicts, such as kids’ extracurricular activities conflicting with work schedules.
Leveraging support systems, including family, partners, and workplace accommodations.

Tools and technologies to streamline busy schedules and increase productivity.
How to Register: Click here for more information and to register.
Event Contact: Association of Consulting Engineering Companies – Saskatchewan. Email: info@acec-sk.ca
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

Bioprocess Engineering for Developing Value Added Sector in Saskatchewan – An APEGS Webinar
2025-03-20 12:00 - 13:00
Date: March 20, 2025
Time: 12:00 PM – 1:00 PM CST (Saskatchewan Time)
Event Format: Live Webinar – Microsoft Teams
Hosting Organization: APEGS – A Member-Led Live Webinar Series Presentation
Event Summary: Bioprocess Engineering, an interdisciplinary field of engineering could support developing new value-added sector in the province. The focus is on converting crops and agriculture residue/by-products to higher value products of industrial application. The focus of the presentation will be on providing high level introduction of work being undertaken in the University of Saskatchewan and discussing projects undertaken by us to add value to various agriculture residue. Specially, the presentation will focus on the work of utilizing canola meal, oat hulls and straw biomass for materials, chemicals and food application.
Presenter: Bishnu Acharya, Ph.D., P. Eng. Dr. Acharya is an Associate Professor and Saskatchewan Ministry of Agriculture Endowed Research Chair in Bioprocess Engineering at the College of Engineering in the University of Saskatchewan. His research focuses on the development of high value bioproducts from low-value biomass and agro processing waste. His research expertise lies in the area of bioprocessing and conversion, particularly in the emerging area of conversion of biomass to bioproducts for chemical, material, and energy applications by adopting a circular bioeconomy approach. His awards include 2024 Mitacs Innovation Award – Outstanding Research Leadership, USask – High Scholarly Impact Award (2024), UPEI Faculty Association – Scholarly Achievement Award (2019), and Graduate Faculty Appreciation Award (2018). Dr. Acharya’s research work has been published in 8 book chapters, over 90 journal articles and several conferences and provided training to more than 70 HQP. Dr. Acharya is also a founding member and scientific advisor of TuniStrong Technologies Inc. and CanXtract Innovation Inc., a spin off from his research activities.
Who Should Attend: Individuals working in the bioprocessing sector covering energy, chemicals and food processing.
General Information: There is no cost to attend, but registration is required. This webinar is eligible for 1 Formal Activity CPD credit. This event will be held live on the Microsoft Teams Webinar platform.
Important: Once your registration is complete, you will receive a Teams Meeting invitation which includes a unique link to join the meeting. This link should not be shared as it is unique to each registration and allows APEGS to verify your attendance.
If you do not receive the Teams Meeting invitation, please check your junk/spam folders and ensure your email security settings allow you to receive all emails from APEGS.
Registration is now closed. If you need to cancel your registration to this event, please email cpd@apegs.ca.
NOTE: Clicking the ‘Add to Calendar’ button on this page does NOT register you for this event.
This webinar will not be recorded.
Event Contact: APEGS Professional Development Department – Angela Foster or Jolene Arthur – cpd@apegs.ca
Disclaimer: The views expressed during this event are those of the presenters and do not necessarily represent the views of APEGS.

The Belcher Islands, Nunavut: a remarkable record of Earth history and the Trans-Hudson orogen
2025-03-21 12:00 - 13:00
Date: March 21, 2025
Time: 12:00 PM
Event Format: In-person presentation
Location: Saskatoon, SK
Hosting Organization: Saskatoon Geoscience Discussion Group
Event Summary: Dr. Camille A. Partin from the University of Saskatchewan will be presenting on the geology of the Belcher Islands in the Hudson Bay of Canada. Registration deadline March 17, 2025.
How to Register: Click here for more information and to register
Event Contact: Saskatoon Geoscience Discussion Group – https://stoongeogroup.ca/
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

Industrial Tour—CNH Industrial
2025-03-24 14:30 - 16:30
Date: March 24, 2025
Time: 2:30 – 4:30 PM
Event Format: In-person Event
Location: Saskatoon, SK
Hosting Organization: Saskatoon Engineering Society
Event Summary: Case New Holland (CNH) is a leading manufacturer in industrial and agricultural equipment and has an extensive manufacturing facility in Saskatoon.

Discover the power of World Class Manufacturing principles.
Learn how CNHi Planters has enhanced their production using these methods.
Gain insight on the assembly line, and manufacturing process.

This tour counts for 1.5 PD unit of formal activity for registered APEGS members. Personal Protective Equipment (PPE) will be provided for all attendees. CNH Industrial has requested that employees of competing companies not participate in this tour. We appreciate registrants’ cooperation in respecting this requirement.
How to Register: Click here for more information and to register
Event Contact: Saskatoon Engineering Society – www.saskatoonengineers.com
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

Industrial Tour — Water Treatment Plant
2025-03-25 10:00 - 12:00
Date: March 25, 2025
Time: 10:00 AM – 12:00 PM
Event Format: In-Person Event
Location: Saskatoon, SK
Hosting Organization: Saskatoon Engineering Society
Event Summary: Join us for an industry tour of the City of Saskatoon Water Treatment Plant as part of Engineering Month! This tour offers a behind-the-scenes look at the advanced processes that ensure safe, clean drinking water for the community. Learn about the engineering principles behind water purification, distribution, and infrastructure management while exploring the plant’s cutting-edge technology and sustainability initiatives. This tour counts for 2 Credits of formal activity for registered APEGS members.
How to Register: Click here for more information and to register
Event Contact: Saskatoon Engineering Society – www.saskatoonengineers.com
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

Intercultural Awareness Workshop
2025-03-25 18:30 - 20:30
Date: March 25, 2025
Time: 6:30 – 8:30 PM
Event Format: In-Person Event
Location: Saskatoon, SK
Hosting Organization: Saskatoon Engineering Society
Event Summary: This session uses an experiential exercise to teach intercultural competency. Attendees have an opportunity to reflect upon communication and how we retreat into assumptions, confusion, conformity, and/or frustrations when those around us ‘speak’ differently (both verbal and non-verbal communication). This event should qualify as Formal Activity in your Continual Professional Development. A certificate of attendance will be provided.
How to Register: Click here for more information and to register
Event Contact: Saskatoon Engineering Society – www.saskatoonengineers.com
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

The Role of Asset Management in Designing for the Future – An APEGS Webinar
2025-03-26 12:00 - 13:00
Date: March 26, 2025
Time: 12:00 PM – 1:00 PM CST (Saskatchewan Time)
Event Format: Live Webinar – Microsoft Teams
Hosting Organization: APEGS – A Member-Led Live Webinar Series Presentation
Event Summary: Asset management is crucial for designing sustainable, adaptable, and future-ready systems. By integrating asset management principles into the engineering design process, engineers can ensure that assets are optimized for long-term performance, cost efficiency, and risk management. This includes planning for lifecycle costs, leveraging data analytics for predictive maintenance, and designing flexible systems that can evolve with emerging technologies. As challenges such as aging infrastructure and sustainability pressures grow, asset management becomes essential for creating resilient solutions to meet future demands. Engineers should embrace this approach to ensure their designs remain effective and adaptable in an ever-changing world.
Presenter: Darren Wiebe, P.Eng., founder and CEO of ASI Engineering, is transforming infrastructure management in Canada. With a career spanning hands-on fieldwork to leadership roles in government, he founded ASI in 2023 to bridge the gap between policy and practice. ASI Engineering specializes in asset management, offering data-driven solutions for aging infrastructure. Darren’s expertise in engineering, project management, and asset strategy ensures practical, field-based decision-making. Passionate about training future engineers, he emphasizes real-world application. ASI Engineering is more than a firm – it’s a partner in infrastructure renewal, shaping sustainable solutions that enhance communities and ensure long-term resilience.
Who Should Attend: Individuals who work in asset-owning organizations, especially those with asset management responsibilities who:

justify funding for critical infrastructure maintenance and upgrades
understand the scope of asset management and are tasked to know what and how to prioritize
are concerned with public or operational backlash due to the risk of infrastructure failures or lack of public safety measures

General Information: There is no cost to attend, but registration is required. This webinar is eligible for 1 Formal Activity CPD credit. This event will be held live on the Microsoft Teams Webinar platform.
Important: Once your registration is complete, you will receive a Teams Meeting invitation which includes a unique link to join the meeting. This link should not be shared as it is unique to each registration and allows APEGS to verify your attendance. If you do not receive the Teams Meeting invitation, please check your junk/spam folders and ensure your email security settings allow you to receive all emails from APEGS.
Registration is now closed. If you need to cancel your registration to this event, please email cpd@apegs.ca.
NOTE: Clicking the ‘Add to Calendar’ button on this page does NOT register you for this event.
This webinar will not be recorded.
Event Contact: APEGS Professional Development Department – Angela Foster or Jolene Arthur – cpd@apegs.ca
Disclaimer: The views expressed during this event are those of the presenters and do not necessarily represent the views of APEGS.

Melville Street Storm Sewer Micro-tunnelling Installation
2025-03-26 12:00 - 13:00
Date: March 26, 2025
Time: 12:00 – 1:00 pm
Event Format: In-person presentation
Location: Saskatoon, SK
Hosting Organization: Saskatoon Geotechnical Group
How to Register: Click here for more information and to register
Event Contact: Saskatoon Geotechnical Group – www.saskatoongeotech.com
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

The Accessibility Professional Network Annual Conference
2025-03-27 - 2025-03-28
Date: March 27 and 28, 2025
Event Format: Hybrid Conference
Location: Vancouver, British Columbia
Hosting Organization: The Rick Hansen Foundation
Event Summary: Brought to you by the Rick Hansen Foundation, APN2025: Building for People is the premier accessibility conference dedicated to the continued commitment to a forward-thinking approach in the creation of an inclusive and accessible future where people are put first. Buildings are for people, and this year’s conference will focus on this topic. The theme of Building for People encourages us to look at accessibility holistically with the user at the center. It inspires professionals to think about how someone truly uses a site, going beyond minimum requirements and current practices to create a truly inclusive world. APN2025 brings together Architects, Engineers, Designers, Planners, municipal staff, individuals working in Diversity, Equity and Inclusivity (DE&I), Accessibility Professional Network (APN) members, and corporate leaders, among others, to collaborate on how to create spaces that work for everyone. Featuring an exciting lineup of national and international speakers, this two-day conference provides attendees with an opportunity to learn about the latest initiatives advancing accessibility through engagement with industry leaders from Canada and abroad.
How to Register: Click here for more information and to register
Event Contact: Rick Hansen Foundation: www.rickhansen.com
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

Industry Celebrating Excellence (ICE)
2025-03-27 18:00 - 20:00
Date: March 27, 2025
Time: 6:00 PM – 8:00 PM
Event Format: In-Person Event
Location: Saskatoon, SK
Hosting Organization: Saskatoon Engineering Society
Event Summary: Join the Saskatoon Engineering Society for Industry Celebrating Excellence (ICE) at the Western Development Museum (WDM). You will meet other engineers and see some industries representing our profession in the Saskatoon area.
How to Register: Click here for more information and to register
Event Contact: Saskatoon Engineering Society – www.saskatoonengineers.com
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

SaskPower's First Renewable Microgrid
2025-04-02 07:00 - 09:00
Date: April 2, 2025
Time: 7:00 AM – 9:00 AM
Event Format: Hybrid Presentation
Location: Saskatoon, SK
Hosting Organization: Saskatchewan Energy Management Task Force (EMTF)Event Summary: The Saskatchewan Research Council (SRC) is working with SaskPower to build SaskPower’s first community-scale renewable microgrid approximately 7 hours north of Saskatoon in Descharme Lake, SK. The hybrid system includes 234-kW of photovoltaics, 492-kWh of lithium-ion battery storage and multiple redundancies to maintain a highly reliable power supply to the community, and is currently being installed. The remotely-controlled system is expected to increase resiliency, reach 85% renewable penetration and yield a payback of about 3 – 4 years compared to the existing 95-km single phase line that currently powers the community. Ryan Jansen will be providing the presentation and will take you through the design, efficiencies, and redundancies of the microgrid.
How to Register: Click here for more information and to register
Event Contact: Saskatchewan Energy Management Task Force – www.emtfsask.ca
Disclaimer: The views expressed during this event are those of the hosting organization and do not necessarily represent the views of APEGS.

Saskatchewan Geological Society's Geocalendar photos needed
2025-04-10 08:00 - 2025-04-15 17:00
Calling all geology lovers and rock enthusiasts! The Geocalendar is looking for striking geologic photos for the 2026 calendar, and we’d love to feature YOUR work! Got an epic outcrop, thin section, or geologic wonder from Saskatchewan? https://www.linkedin.com/feed/update/urn:li:activity:7312488175518552064
Send us your best shots with a description and location by April 15, 2025. 📩
Submit to: sask.geological.calendar@gmail.com Let’s capture the beauty of Saskatchewan’s geology—one photo at a time!

Navigating Contracts and Insurance Requirements - an APEGS Webinar
2025-04-10 12:00 - 13:00
Date: April 10, 2025
Time: 12:00 PM – 1:00 PM CST (Saskatchewan Time)
Event Format: Live Webinar – Microsoft Teams
Hosting Organization: APEGS – A Live Webinar Series Presentation
Event Summary: Our aim is to help professionals better understand contractual requirements, focusing on common challenges and unclear standards. Topics include the basics of Errors & Omissions (E&O) and Commercial General Liability (CGL) insurance and why contracts are essential in professional practice. We will also explore changes in the legal landscape, such as increasing limits, jurisdictional pressures, and the shortage of experts. Attendees will learn about rising contractual demands and what is considered “standard” in the industry. The goal is to provide clear and practical insights, so participants feel more confident navigating contracts and meeting professional obligations.
Presenters:
Adam Thomson, CIP, Senior Advisor, Commercial Lines – Adam brings over 16 years of experience in commercial insurance, specializing in all areas of liability coverage, protection & risk management. As a third-generation broker, Adam is passionate about driving innovation in the insurance industry, developing unique approaches to risk management. He began his career as an underwriter with Aviva in 2008, building a strong foundation in insurance fundamentals. In 2011, he transitioned to brokering and quickly established himself as a leader in the field. In 2019, Adam was recognized by his peers as one of Canada’s Top 10 Insurance Brokers Under 40. Adam is a trusted advisor for many individuals and organizations nationwide, delivering exceptional service through expert advice, risk mitigation, and management strategies.
Connor Yeo, BSc., Advisor, Commercial Lines – Connor received his Bachelor of Science in Biology from the University of Saskatchewan in 2012. With a science background, Connor brings curiosity and a deep understanding of his clients’ needs. Focused on education and risk management, he aims to be a trusted advisor, helping clients navigate their risks with confidence and informed decisions. Connor started his insurance career in 2020 with HK Henderson Insurance as a Motor License Issuer. Early on, his passion for learning and self-starting attitude was recognized and rewarded. In 2021, Connor was promoted to Advisor – Commercial Lines.
Who Should Attend: For those members that:

Need a better understanding of contractual requirements in their work.
Encounter challenges with unclear processes and standards in contracts.
Want to learn about insurance basics like Errors & Omissions (E&O) and Commercial General Liability (CGL).
Are affected by the changing legal landscape and rising contractual demands.
Seek practical knowledge on navigating industry standards and managing professional risks effectively.

General Information: There is no cost to attend, but registration is required. This webinar is eligible for 1 Formal Activity CPD credit. This event will be held live on the Microsoft Teams Webinar platform.
Important: Once your registration is complete, you will receive a Teams Meeting invitation which includes a unique link to join the meeting. This link should not be shared as it is unique to each registration and allows APEGS to verify your attendance. If you do not receive the Teams Meeting invitation, please check your junk/spam folders and ensure your email security settings allow you to receive all emails from APEGS.
Registration is now closed. If you need to cancel your registration to this event, please email cpd@apegs.ca. NOTE: Clicking the ‘Add to Calendar’ button on this page does NOT register you for this event. This webinar will not be recorded.
Event Contact: APEGS Professional Development Department – Angela Foster or Jolene Arthur – cpd@apegs.ca
Disclaimer: The views expressed during this event are those of the presenters and do not necessarily represent the views of APEGS.
